Christopeit Sport MB4 Operations Instructions download pdf (Page 17)

English

Step 4:

Attach the computer (1) at handlebar support (7).

1. Push the plug of the connecting cable (6) projecting from the handlebar

support (7) into the associated socket of the computer (1).

2. Place the computer on the plate provided for it on the handlebar support

(7) and attach it with the screws (28).

3. Push the plug of the pulse cable (5) projecting from the handlebar (4)

into the associated socket of the computer (1).

Step 5:

Installation of saddle (17) at saddle support (21) by using saddle slide

(19). Installation of saddle support (21) at mainframe by using rapid

action lock (44).

1. Push the saddle (17) with saddle bracket into the movable saddle slide

(19) and tight it up in desired position.

2. Place the movable seat post (19) into the holder of saddle post (21), set

it at the desired horizontally position and tighten it by washer (22) and

movable seat knob (23).

3. Insert the saddle support (12) into the provided holder of the main frame

(27) and secure at the desired position by screwing in the rapid-action

lock (44).

(Note: To screw in the rapid-action lock (44), the threaded hole in the

main frame (27) and one of the holes in the saddle support (21) must be

aligned. Furthermore, ensure that the saddle support (21) is not pulled

out of the main frame beyond the marked maximum Position. The setting

of the saddle post can be adjusted as desired later. For this, the rapid

action catch (44) must be loosened by only a few revolutions, the cap

of the lock must be pulled away and the saddle adjusted. Then secure

the new setting by tightening the rapid action catch.

Step 6:

Installation of the right pedal (68R) and the left pedal (68L) on the

pedal arms (69R+69L).

1. The pedals are marked „R“ for right and „L“ for left.

2. Screw the right pedal (68R) into the threaded hole on the right hand side

of the pedal arm (69R) and tighten ﬁrmly.

(Note: Right and left are speciﬁed as viewed seated on the machine

during training. It must also be observed that the threaded part of the

right pedal must be screwed clockwise into the threaded hole of the

pedal crank.)

3. Screw the left pedal (68L) into the threaded hole on the left hand side

of the pedal arm (68L) and tighten ﬁrmly.

(Note: The threaded part of the left pedal must be screwed anticlockwise

into the threaded hole of the pedal crank.)

4. Then attach the pedal straps left and right to the respective pedals.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 43 44

Comments to this Manuals

No comments

Christopeit Sport MB4 Operations Instructions Page 17

Comments to this Manuals

Related products and manuals for Spin bikes Christopeit Sport MB4