Christopeit Sport Mini Bike MB 3 User Manual download pdf (Page 10)

Assembly Instructions

Before beginning assembly, be sure to observe our recommendations

and safety instructions.

Step 1:

Installation of front and rear foot (5+6) at main frame (1).

1. Place each 2 screws (9) beside the rear and front part of the main frame (1).

2. Put the longer rear foot (6) into the rear holder of the main frame (1) so that

the holes of the holder and rear foot are aligned. Screw tightly with screws (9).

3. Put the shorter front foot (5) into the front holder of the main frame (1) so

that the holes of the holder and front foot are aligned. Screw tightly with

screws (9).

Step 2:

Installation of the right and left pedal (3R+3L) at pedal crank (2R+2L).

1. The pedals and pedal crank (3R+3L) are marked with „R“ for right side

and „L“ for left side.

(Note: Right and left side are speciﬁed as viewed seated in front of the

machine during training.)

2. Screw the right pedal (3R) into the threaded hole of right pedal crank

(2R) and tighten ﬁrmly. (Note: It must be observed that the threaded part

of the right pedal (3R) must be screwed clockwise into the threaded hole

of right pedal crank (2R).)

3. Screw the left pedal (3L) into the threaded hole of the left pedal crank

(2L) and tighten ﬁrmly. (Note: The threaded part of the left pedal (3L) must

be screwed anticlockwise into the threaded hole of left pedal crank (2L).)

Attach the power

Please insert the plug of power cable (23) into the jack of wall power

(230V~50Hz).

Start the computer (4).

Start exercising or push F-key at computer and the display of computer

show data. If not, take out the computer (4) from housing, insert one button

cell of the type AG13 or LR44 into battery compartment of the back side of

computer. Observe the right polarity and put the computer back into housing.

(If the batteries for the computer are not included in this item, please buy

them at your located market.)

Step 3:

Checks:

1. Check the correct installation and function of all screwed and plug con-

nections. Installation is thereby complete.

2. When everything is in order, familiarize yourself with the machine at a low

resistance. Setting and make your individual adjustments.

Note: Please keep the tool set and the instructions in a safe place as these

may be required for repairs or spare parts orders becoming necessary later.

Training Instructions

Arm training:

Leg training:

Put the right hand on the right pedal and push with left hand the on/off

button and catch immediately the left pedal

and follow the entered speed.

Put the middle of the feet onto the pedals and secure

with the pedal strap. Push the Ein/Aus button to start

exercising and follow the entered speed.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

Comments to this Manuals

No comments

Christopeit Sport Mini Bike MB 3 User Manual Page 10

Comments to this Manuals

Related products and manuals for Spin bikes Christopeit Sport Mini Bike MB 3